Ultra-Thin Microwire Multiwire Machine
A specialist multiwire system for processing marble and natural-stone blocks with ultra-thin diamond wire. Review published technical data and request a configuration-specific quotation.
Request a quotation View all machineryKey published specifications
| Diamond wire diameter | 0.35–0.6 mm |
| Slab cutting thickness | 5–30 mm |
| Cutting depth (medium-soft marble) | 100–150 mm/h |
| Wire speed | 0–20 m/s |
| Cutting tension | 0–250 N |
| Wire storage length | 30 km |
| Roller system | 8 rollers · Ø320 mm (Ø350 mm upgrade option) |
| Main motors | 60 kW × 4 |
| Total installed power | Approx. 310 kW |
| Cooling water | 1000 L/min |
| Overall dimensions | Approx. 9000 × 5600 × 5500 mm |
Values are transcribed from the BM MicroWire 2027 brochure. Confirm final configuration, utilities and performance for the material and operating conditions before ordering.
System features
- Servo wire-tension feedback
- Wire-break protection
- Automatic lubrication
- PLC touchscreen control
- Inovance / INVT control and servo options as stated in the brochure
- Aluminium and polyurethane roller construction
- Block lifting feed with 0–2400 mm stroke
Applications
Ultra-thin multiwire processing of marble and natural-stone blocks, with final wire selection and tension calibration matched to the stone.
Download Microwire catalogue (PDF)Frequently asked questions
What wire diameter is specified?
The brochure lists a diamond wire diameter range of 0.35–0.6 mm.
What slab thickness range is listed?
The brochure lists slab cutting thickness of 5–30 mm.
Is the stated cutting depth guaranteed?
No. The 100–150 mm/h figure is stated for medium-soft marble; actual performance depends on stone, wire and operating conditions.
产品说明
采用超细金刚石线的多线切割系统,适用于大理石及天然石材荒料加工。查看技术参数并咨询具体配置。
常见问题
What wire diameter is specified?
The brochure lists a diamond wire diameter range of 0.35–0.6 mm.
What slab thickness range is listed?
The brochure lists slab cutting thickness of 5–30 mm.
Is the stated cutting depth guaranteed?
No. The 100–150 mm/h figure is stated for medium-soft marble; actual performance depends on stone, wire and operating conditions.